Images are representations only.
SITRANS CU02 Alarm Control Unit
Brand: Siemens AGITRANS CU02 is an alarm control unit for use with the SITRANS AS100 acoustic sensor.
It provides reliable continuous protection for bulk solids flow.
The system can be readily configured for set points indicating conditions such as high flow, low flow or no flow.
Alternatively, it can be added to a control loop via a 4 to 20 mA isolated output for trend monitoring proportional to the signal from the sensor.
The SITRANS CU02 alarm control unit has two relays that are fully programmable and independent of each other and can be used to operate an alarm or control device.
Alarming may be provided above or below a setpoint or within a band. Readings are also displayed locally by the SITRANS CU02 LCD display.
The SITRANS CU02 may be mounted up to 1,500 ft (500 m) from the sensor.
The SITRANS CU02 receives a 0 to 10 V DC input signal from the SITRANS AS100 sensor, providing relay and analog outputs for interface into a process.
Features- 4 to 20 mA output
- Two programmable relays
- Adjustable independent time delay for each relay
- Adjustable start-up time delay
- DIN rail mounting provides easy installation
- Built-in password protection to parameters
Specifications
Brand
Input
- 0-10 Vdc
Output Signal
- 4-20 mA
Ambient Temperature
- -20° to 50° C (-4° to 122° F)
Storage Temperature
- -20° to 50° C (-4° to 122° F)
Humidity
- 80 % Relative Humidity
Environmental Protection
- IP20
Enclosure/Body Material
- Enclosure: Polycarbonate
Cable
- 2 Twisted Pair, 24 AWG (22 mm²), Shielded. Mount Up to 500 m (1,500 ft) From Sensor
Mounting
- DIN Rail (DIN 46277 or DIN EN 50022),
- Wall Mount
Display
- Liquid Crystal, 3 Digits, 9 mm (0.35 inch), High and Multi-segment Graphic Symbols for Operation Status
Supply Voltage
- 100, 115, 200, 230 Vac ± 15 %, 50/60 Hz
Power Consumption
- Maximum 10 VA
Certifications & Approvals
- cCSAus, CE, UKCA, RCM, EAC, KC
- Connects to SITRANS AS100 to Detect Burst Filter Bag
